跳到正文
返回论文列表
cs.CE提交于 已译

面向多材料3D打印的端到端优化

Towards end-to-end optimization in multimaterial 3D printing

Xue-Ling Luo · Steven Yang · Jingye Tan · Robert F. Shepherd · Noy Cohen · Nikolaos Bouklas

中文摘要

多材料3D打印能够制造功能梯度构件,但要在高维设计空间和复杂本构建模下同时优化材料空间分布与结构拓扑仍极具挑战。在拓扑优化中使用神经网络本构律需要其切线与设计灵敏度,现有方法通过自动微分或手工推导获得。该工作将稀疏化(把训练好的物理增强神经网络约简为紧凑、可解释的闭式本构律)与符号微分结合,实现从新型连续变化多材料系统到力学仿真与设计的端到端流程。从实验数据训练的稀疏化神经网络中提取闭式、成分感知的超弹性本构律,可对FEniCSx实现的伴随状态法所需项进行精确符号微分,规避神经网络本构模型在分析与优化中的瓶颈。该流程应用于软体机器人夹爪,展示了对高度各向异性接触响应的连续成分优化,以及在非失效拉伸约束下宏观拓扑与材料分布的并发优化。该研究朝着替代传统本构建模与繁琐经验原型制作迈出一步,使可解释机器学习模型成为先进多材料增材制造的实用、稳健设计基元。

关键要点

  1. 01多材料3D打印需同时优化材料分布与结构拓扑,高维设计空间和复杂本构模型构成瓶颈。
  2. 02用稀疏化将物理增强神经网络约简为闭式超弹性本构律,并结合符号微分实现端到端流程。
  3. 03在FEniCSx伴随状态法中精确符号微分,规避神经网络本构模型在分析与优化中的瓶颈。
  4. 04软体机器人夹爪应用实现各向异性接触响应的连续成分优化与拓扑-材料并发优化。
  5. 05目标是以可解释机器学习模型替代传统本构建模与经验原型制作,作为多材料增材制造的设计基元。

解读

尚无解读。

原始英文摘要

arXiv:2607.13174v2 Announce Type: replace-cross Abstract: Multimaterial 3D printing enables the fabrication of functionally graded components, but optimizing their spatial material distribution alongside structural topology remains a formidable challenge due to high-dimensional design spaces and complex constitutive modeling. Using neural network constitutive laws in topology optimization requires their tangents and design sensitivities, which current approaches obtain by automatic differentiation through the network or derivation by hand. This paper combines sparsification, which reduces a trained physics-augmented neural network to a compact, interpretable closed-form law, with symbolic differentiation, enabling an end-to-end workflow from a new continuously varying multimaterial system to its mechanical simulation and design. By extracting closed-form, composition-aware hyperelastic constitutive laws from sparsified neural networks trained on experimental data, this approach facilitates exact symbolic differentiation of the terms required by the adjoint state method implemented with FEniCSx, circumventing the bottlenecks of applying neural network constitutive models in analysis and optimization. This pipeline is deployed on soft robotic gripper applications, demonstrating continuous composition optimization for highly anisotropic contact responses, and the concurrent optimization of macroscopic topology and material distribution under non-failure stretch constraints. This study is a step toward replacing conventional constitutive modeling and laborious empirical prototyping, establishing interpretable machine-learning models as practical, robust design primitives for advanced multimaterial additive manufacturing.

同方向论文 · cs.CE

查看全部 →