跳到正文
返回论文列表
cs.CE提交于 已译

MiDShip: 船舶货舱结构多模态数据集用于工程设计

MiDShip: Multimodal Dataset of Ship Cargo Hold Structures for Engineering Design

Noah J. Bagazinski · Md. Ferdous Alam · Jaya Manideep Rebbagondla · Faez Ahmed

中文摘要

船舶结构决定船舶强度、安全性和可制造性,但其设计需满足数百项船级社规范,过程复杂且迭代性强。数据驱动方法受限于缺乏链接设计几何、结构性能和基于规则约束的结构化数据集。本文提出MiDShip,一个包含12,753个合成货舱结构设计的的多模态(multimodal)数据集:6,020个随机设计、496个由SGLD启发式程序生成、6,237个由方程知情修复程序生成。每个设计包含参数化数据、完整且可网格化的3D几何、工程图纸和注释、材料清单以及初步结构评估。还评估了源自ABS MVR子集的25项约束。随机设计均不满足所有约束。SGLD启发式设计中322个(64.9%)完全合规,平均违规0.409次,低于种子均值82.7%、低于随机设计均值96.9%。通过LLM辅助代码分析开发的修复程序产生4,952个完全合规设计(79.4%),平均违规0.296次,低于配对来源均值97.1%。等规模比较中,120参数空间中修复设计的平均最近邻距离为3.495,SGLD批次为1.144,随机设计为3.729。主要贡献是同步数据集及其生成和评估基础设施;生成研究展示其效用而非提出新优化算法。MiDShip支持船舶结构的机器学习、生成式设计和自动化基于规则的评估。

关键要点

  1. 01数据集包含12,753个合成货舱结构设计,含参数化数据、可直接网格化的3D几何、工程图纸、注释、材料清单和初步结构评估
  2. 02基于ABS MVR子集的25项约束评估显示:随机设计合规率为0%,SGLD启发式设计64.9%合规,修复程序设计79.4%合规
  3. 03SGLD启发式设计平均违规0.409次,比随机设计低96.9%;修复程序设计平均违规0.296次,比配对来源低97.1%
  4. 04120参数空间中修复设计平均最近邻距离3.495,SGLD批次1.144,随机设计3.729
  5. 05主要贡献为同步数据集及其生成评估基础设施,生成研究展示实用性而非提出新优化算法,支持船舶结构机器学习与生成式设计

解读

尚无解读。

原始英文摘要

arXiv:2610.02214v1 Announce Type: cross Abstract: Ship structures govern vessel strength, safety, and manufacturability, but their design must satisfy hundreds of classification society requirements, making the process complex and iterative. Data-driven approaches are limited by the lack of structured datasets linking design geometry, structural performance, and rule-based constraints. This paper presents MiDShip, a multimodal dataset of 12,753 synthetic cargo-hold structural designs: 6,020 random, 496 generated by an SGLD-inspired procedure, and 6,237 generated by an equation-informed repair procedure. Each design includes parametric data, full and mesh-ready 3D geometry, engineering drawings and annotations, a bill of materials, and preliminary structural evaluations. Twenty-five constraints derived from a subset of ABS MVR are also evaluated. None of the random designs satisfies all constraints. Among the SGLD-inspired designs, 322 (64.9%) were fully compliant, with an average of 0.409 violations, 82.7% below the seed mean and 96.9% below the random-design mean. The repair procedure, developed through LLM-assisted code analysis, produced 4,952 fully compliant designs (79.4%), averaging 0.296 violations, 97.1% below the paired-source mean. In equal-size comparisons, mean nearest-neighbor distances in the scaled 120-parameter space were 3.495 for repaired designs, 1.144 for SGLD batches, and 3.729 for random designs. The primary contribution is the synchronized dataset and its generation and evaluation infrastructure; the generation studies demonstrate its utility rather than proposing new optimization algorithms. MiDShip supports machine learning, generative design, and automated rule-based evaluation for ship structures.

同方向论文 · cs.CE

查看全部 →